Software Release R12C
3 June 2009
The new firmware introduces the following:
- See release notes
To determine 'your current software version' log onto the W25's web interface, click on the system tab and check the 'Application Software' version. Please download the upgrade instructions and appropriate files below:
Current Software |
First File Required |
Second File Required |
Third File Required |
R4B/R5C/R6A |
|
|
|
R9A |
|
|
|
R9B |
|
|
|
R9D/R10A/R10B/R10C |
|
|
|
R11A/R11B/R12A |
|
|
|
Important
(i) Please Note: Firmware upgrades are done at your own risk.
(ii) If your firmware revision does not appear in the list above then it is highly likely you have unique firmware from your carrier, if this is the case upgrading using the above firmware may cause your unit to become inoperable. Contact your carrier for a software upgrade file.
(iii) Please make sure you install the correct files according to your current firmware before upgrading to R12C otherwise your unit will become inoperable and will need to be sent back for repair.
(iv) WLAN needs to be turned off to conserve memory during the upgrade.
(v) Unzip the files first before installing, except for the .arc files which do not need to be uncompressed.
|
